Description
Fire Clean model harness REF. 32501, compliant with UNE EN 813:2009 "Personal protective equipment for preventing falls from height. Seat harnesses", UNE EN 361:2002 "Personal protective equipment against falls from height. Fall arrest harnesses" and EN 1496:2006 "Personal protective equipment against falls. Rescue loops".
It is tested according to EN813, and when joined with the top, it will comply with EN361 before and after 40 cleanings.
The lashing elements will be joined by a connector that complies with EN362:2004 Type B, it will be multidirectional with automatic three-movement safety closure or by means of a 60 cm webbing ring that complies with EN 566:2017, EN 354:2010 and EN 795:2012 Type B and a connector that complies with EN362:2004 Type B, it will be multidirectional with automatic three-movement safety closure.
INCORPORATION SYSTEM: INSIDE THE JACKET AND OVERTROUSERS USING TUNNELS.
The design of the jacket and overpants will facilitate donning, use, and handling of the harness for subsequent inspection and cleaning of the suit. Under no circumstances will the system chosen for positioning the harness in the jacket and overpants pose a problem for dressing.
The chest harness consists of a V-shaped shoulder strap. Its loops are reinforced with flame-resistant fabric. It is made of high-tenacity polyester material with no metal fasteners, making it easy to clean without having to remove it from the suit. Cleaning instructions for both PPE are required.
The seat harness uses the tunnels necessary to fit the harness into the pants. It consists of a lumbar belt, thigh loops, and their connections. Its loops are reinforced with flame-resistant fabric. It is made of high-tenacity polyester material without metal fasteners, making it easy to clean without having to remove it from the suit during cleaning. Cleaning instructions for both PPE are required.
